Jensen Inert Products
Jensen Inert Products
3773 NW 126th Avenue
Coral Springs, Florida 33065
Toll Free: 1-800-446-3781
Tel: 954-344-2006
Fax: 954-344-2008
Email: jensen@jenseninert.com
Website: www.jenseninert.com
Print Back
Polyethylene tubing with the advantages of FEP... at SUBSTANTIALLY lower cost
  • Economical
  • No plasticizers
  • No fillers
  • No VCM
  • Excellent chemical resistance
  • Translucent
  • Cleans easily
  • No liquid absorption
  • Odorless and tasteless
  • Jacket and liner made from resins meeting requirements
  • Non-photo active
  • Lightweight
  • Flexible
  • Excellent low temperature toughness
  • Service temperature: -25 ºF to +180 ºF
  • Jacket hardness shore D 43
  • Jacket density 0.920
  • Polyethylene jacket resists weak acids and bases, and strong oxidizing acids. Fair resistance to strong bases.
  • Resistant to organic solvents below 60 ºC except chlorinated solvents
Uses
Down well purging, sampling, general lab uses, tough field applications
Each individual application should be evaluated to determine the degree of safety factor to be used with Room Temp.
Unit of Measure

Specifications

Material

 N/A Fluorinated Ethylene Propylene (FEP) Liner

Inside Diameter (ID)

 N/A 1/8 "

Outside Diameter (OD)

 N/A 1/4 "

FEP Liner Thickness

 N/A 0.010 "

Pure-Flow Polyethylene Note

N/A Pure-Flow tubing can be used with compression fittings. However, to insure the integrity of the liner, we recommend the use of barbed fittings.
Design Data

  • Service temperature - 25°F to +180°F
  • Jacket hardness shore D 43
  • Jacket density .920
  • Polyethylene jacket resists weak acids and bases, and strong oxidizing acids. fair resistance to strong bases.
  • Resistant to organic solvents below 60°C except chlorinated solvents.