Catalog Number TTL0104-0308, Pure-Flow Polyethylene Lined with FEP Tubing On Jensen Inert Products

Polyethylene tubing with the advantages of FEP... at SUBSTANTIALLY lower cost

Economical
No plasticizers
No fillers
No VCM
Excellent chemical resistance
Translucent
Cleans easily
No liquid absorption
Odorless and tasteless
Jacket and liner made from resins meeting requirements
Non-photo active
Lightweight
Flexible
Excellent low temperature toughness
Service temperature: -25 ºF to +180 ºF
Jacket hardness shore D 43
Jacket density 0.920
Polyethylene jacket resists weak acids and bases, and strong oxidizing acids.

Unit of Measure

Specifications | Pure-Flow Polyethylene Note

Specifications

Material	N/A Fluorinated Ethylene Propylene (FEP) Liner
Inside Diameter (ID)	N/A 1/4 "
Outside Diameter (OD)	N/A 3/8 "
FEP Liner Thickness	N/A 0.010 "

Pure-Flow Polyethylene Note

N/A Pure-Flow tubing can be used with compression fittings. However, to insure the integrity of the liner, we recommend the use of barbed fittings.
Design Data

Service temperature - 25°F to +180°F
Jacket hardness shore D 43
Jacket density .920
Polyethylene jacket resists weak acids and bases, and strong oxidizing acids. fair resistance to strong bases.
Resistant to organic solvents below 60°C except chlorinated solvents.

Specifications

Material

Inside Diameter (ID)

Outside Diameter (OD)

FEP Liner Thickness

Pure-Flow Polyethylene Note