Print Back
Unit of Measure

Specifications

Film Material

N/A FEP

Capacity

N/A 5.0 L

Size

N/A 12 x 12 in

Film Thickness

N/A 0.005 in

Bags Per Package

N/A 10

Use with Tubing Size (ID)

N/A 3/16 in1/4 in

Minimum Order Quantity

N/A 10

Note

N/A Valve is 100% Inert Virgin PTFE.
Locking Combo® is a registered trademark of Jensen Inert Products, Inc.
Swagelok® is a register trademark of Swagelok, Inc.
Jaco® is a registered trademark of Jaco Manufacturing, Inc.
HR® is a registered trademark of Halkey Roberts, Inc.
Tedlar® is a registered trademark of E.I. Dupont

Additional Information

N/A Optional Cap with Septum available. Add SC to the end of part number for this option.

Valve/Fitting Features

N/A

  • Valve is 100% Inert Virgin PTFE
  • All wetted parts are 100% Virgin PTFE
  • Optional Cap with Septum available

Film Key Features

N/A FEP is one of the most chemically inert materials for making gas sampling bags. It works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in most stack sampling conditions. 5 mil FEP film is completely resistant to the most severe corrosives. Much more permeable than Multi-Layer or Tedlar®. FEP bags can be specified for applications involving corrosive gases.

Suggestion

N/A

  • Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
  • During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
  • Bags should not be filled to more than 80% of their maximum volume.
  • Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
  • Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
  • Bags should not be used to collect reactive or unstable compounds.
  • When shipping bags, do not air-ship unless the bags are stored in a pressurized area.

Film Properties

N/A

  • One of the most chemically inert materials available for making gas sampling bags
  • Maximum operating temperature: 400 ºF
  • Virtually transparent

Film Advantages

N/A

  • Works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in all stack sampling conditions
  • Heavier gauge (0.005) film is resistant to most severe corrosives as well as tolerates applications involving rough handling or difficult service conditions
  • Less expensive than PFA

Film Limitations

N/A

  • Poor long term storage stability for most VOC's and sulfur compounds
  • Much more permeable than Tedlar®, ALTEF, and Multi-Layer Foil bags
  • More expensive than Tedlar®, ALTEF, Multi-Layer Foil, and TFM bags
  • Lower tensile strength than Tedlar®

Valve/Fitting Benefits

N/A

  • All wetted parts are 100% Virgin PTFE
  • PTFE Washer placed inside bag film
  • Optional Cap with Replaceable Septum available