Jensen Inert Products - ALTEF Gas Sampling Bags with PFA Fitting for 1/4" OD Tubing

Unit of Measure

Items	GSST14T-0606 6 x 6 Inch (in) Size ALTEF Gas Sampling Bag with PFA Fitting for 1/4" OD Tubing	GSST14T-0707 7 x 7 Inch (in) Size ALTEF Gas Sampling Bag with PFA Fitting for 1/4" OD Tubing	GSST14T-0610 6 x 10 Inch (in) Size ALTEF Gas Sampling Bag with PFA Fitting for 1/4" OD Tubing	GSST14T-0909 9 x 9 Inch (in) Size ALTEF Gas Sampling Bag with PFA Fitting for 1/4" OD Tubing	GSST14T-1010 10 x 10 Inch (in) Size ALTEF Gas Sampling Bag with PFA Fitting for 1/4" OD Tubing
Film Material	N/A ALTEF
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.003 in
Note	N/A Valve is PFA fluoropolymer. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I. Dupont
Bags Per Package	N/A 5
Additional Information	N/A Catalog No. CAP-14-PS, Extra Cap with Septum for PFA fitting, Each
Valve/Fitting Features	N/A PFA fluoropolymer construction Option of cap for tubing, or cap with septum. Compression ferrule secures tubing onto fitting. Replaceable fluoropolymer faced septum with large area.
Film Key Features	N/A ALTEF is a proprietary fluoropolymer film developed specially for the air sampling market. ALTEF meets or exceeds many of the desired characteristics of Tedlar®. Unlike Tedlar®, ALTEF does not exhibit background levels of DMAC and phenol. ALTEFexhibits similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs. Low VOC and sulfur background levels. Contains no additives, fillers or pigments. Minimal adsorption. Superior storage for organics. Abrasion Resistant.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A Developed specifically for gas sampling applications Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and alcohols Maximum operating temp: 260 ºF ALTEF bags are made of 0.003" thick film. Tensile Strength 6100 psi
Film Advantages	N/A Suitable for sampling most VOCs and many sulfur compounds Low VOC background Longer sample storage times than most other bag materials Does not exhibit background levels of DMAC or phenol, as Tedlar^® does Lower permeability than Tedlar^® to CO₂, N₂, CH₄ Superior resistance to solvents
Film Limitations	N/A More permeable to most compounds than Tedlar^® (0.003" thick versus 0.002" for Tedlar^® Bags) Not suitable for sampling ketones and esters in high concentrations (>30 %) Less resistance to UV light than Tedlar^® Many sulfur compounds should be analyzed within 24 hours. More expensive than Tedlar^®
Valve/Fitting Benefits	N/A Sample only comes into contact with high purity, inert fluoropolymer PFA, the ultimate in chemical resistance and non-contaminating material. Allows attachment of tubing or syringe sample extraction by changing caps Superior grip compared to metal fittings. Allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum.
Use with Tubing Size (OD)	N/A 1/4 in
Minimum Order Quantity	N/A 5