Jensen Inert Products - Tedlar® Gas Sampling Bags with PTFE ON/OFF Valve with Stopcock

Unit of Measure

Items	GSTNTFEV-0606 6 x 6 Inch (in) Size Tedlar^® Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock	GSTNTFEV-0707 7 x 7 Inch (in) Size Tedlar^® Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock	GSTNTFEV-0610 6 x 10 Inch (in) Size Tedlar^® Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock	GSTNTFEV-0909 9 x 9 Inch (in) Size Tedlar^® Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock	GSTNTFEV-1010 10 x 10 Inch (in) Size Tedlar^® Gas Sampling Bag with PTFE ON/OFF Valve with Stopcock
Film Material	N/A Tedlar^®
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.002 in
Note	N/A Valve is 100% Inert Virgin PTFE. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I. Dupont
Bags Per Package	N/A 10
Additional Information	N/A Optional Cap with Septum available. Add SC to the end of part number for this option.
Valve/Fitting Features	N/A Valve is 100% Inert Virgin PTFE All wetted parts are 100% Virgin PTFE Optional Cap with Septum available
Film Key Features	N/A Tedlar^® film has very low gas permeation levels for most compounds, and high tensile strength. Bags resist puncture in the field. 2 mil Tedlar^® film is an economical alternative to FEP bags. Tedlar^® is much less permeable than FEP and is unaffected by the chemical components of gases generally sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptans. Continuous use temperature from -98 to 400 ºF (temperature limit depends on fittings used). Required for many EPA testing methods.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A Low gas permeation levels - Most gases High tensile strength Withstands temperatures up to 400 ºF Unaffected by the chemical components of gases commonly sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon, and mercaptons Tensile Strength 8000 psi
Film Advantages	N/A Less permeable than FEP, PFA, and TFM Bags resist puncture in the field Less expensive than FEP, PFA, and TFM film Recommended in many EPA testing methods
Film Limitations	N/A Exhibits background levels of DMAC and phenol High permeation rate for CO₂ Relatively high permeation rate for O₂ *NOTE: We offer bags specially conditioned to remove DMAC and phenol from Tedlar^®
Valve/Fitting Benefits	N/A All wetted parts are 100% Virgin PTFE PTFE Washer placed inside bag film Optional Cap with Replaceable Septum available
Use with Tubing Size (ID)	N/A 3/16 in1/4 in
Minimum Order Quantity	N/A 10