PLASTIC JACO^® FITTING FOR 1/4" TUBING OR SEPTUM

• Polypropylene molded construction is inexpensive compared to metal fittings.
• Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes.
• Allows reuse of valve by only replacing septum.
• Option of cap with septum or cap for use with tubing.
• Allows syringe sample extraction or attachment of tubing by changing caps
• Compression ferrule secures tubing onto fitting, which provides a superior grip compared to metal fittings
• Prices include Jaco^® fitting for 1/4" OD tubing or septum.
• Bags with grommets available.
• Bags with multiple fittings available.
• Custom sized bags available.

Fitting is inert, industry standard polypropylene.
Locking Combo^® is a registered trademark of Jensen Inert Products, Inc.
Swagelok^® is a register trademark of Swagelok, Inc.
Jaco^® is a registered trademark of Jaco Manufacturing, Inc.
HR^® is a registered trademark of Halkey Roberts, Inc.
Tedlar^® is a registered trademark of E.I. Dupont.

• Catalog No. CAP-14-JT, Cap, Polypropylene, Jaco^® Set Up for 1/4" Tubing
• Catalog No. SEP5007-JSF-10, Septa, 10/90, 10 mm for Jaco Fitting/10 EA.

• Compression ferrule secures tubing onto fitting.
• Polypropylene molded construction.
• Option of cap for tubing, or cap with septum.
• Replaceable fluoropolymer faced septum with large area.

Tedlar^® film has very low gas permeation levels for most compounds, and high tensile strength. Bags resist puncture in the field. 2 mil Tedlar^® film is an economical alternative to FEP bags. Tedlar^® is much less permeable than FEP and is unaffected by the chemical components of gases generally sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptans. Continuous use temperature from -98 to 400 ºF (temperature limit depends on fittings used). Required for many EPA testing methods.

• Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
• During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
• Bags should not be filled to more than 80% of their maximum volume.
• Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds
• Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
• Bags should not be used to collect reactive or unstable compounds.
• When shipping bags, do not air-ship unless the bags are stored in a pressurized area.

• Low gas permeation levels - Most gases
• High tensile strength
• Withstands temperatures up to 400 ºF
• Unaffected by the chemical components of gases commonly sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon, and mercaptons
• Tensile Strength 8000 psi

• Less permeable than FEP, PFA, and TFM
• Bags resist puncture in the field
• Less expensive than FEP, PFA, and TFM film
• Recommended in many EPA testing methods

• Exhibits background levels of DMAC and phenol
• High permeation rate for CO₂
• Relatively high permeation rate for O₂
• *NOTE: We offer bags specially conditioned to remove DMAC and phenol from Tedlar^®

• Superior grip compared to metal fittings.
• Inexpensive compared to metal fittings.
• Allows attachment of tubing or syringe sample extraction by changing caps.
• Allows repeated punctures with common lab syringes.
• Allows reuse of valve by only replacing septum.