Jensen Inert Products
Jensen Inert Products
3773 NW 126th Avenue
Coral Springs, Florida 33065
Toll Free: 1-800-446-3781
Tel: 954-344-2006
Fax: 954-344-2008
Email: jensen@jenseninert.com
Website: www.jenseninert.com
Print Back
Pressure Relief Valves are constructed with a 100% pure PTFE Valve Body and Valve Plug. The single O-Ring design allows user selection of EP, Viton or Kalrez, depending on the flowing media. The Pressure Relief Valve is factory configured for a 10 psi to 90 psi pressure range. The relief valve is fully adjustable within this range by simply adjusting the upper Socket Hex Adjustment Screw and locking in place with the associated locking nut. The Pressure Relief Valve is configured with three Upper Housing and Lower Base options: Polyvinylidene Fluoride ("PVDF"), Polypropylene ("PP") or Anodized Aluminum ("AA") as shown.
BECO pressure relief valves
Unit of Measure
Items BECO pressure relief valves
VPR01040104-PEA
EP (Ethylene Propylene) O-Ring Type PTFE Pressure Relief Valve 		BECO pressure relief valves
VPR01040104-PKA
Kalrez O-Ring Type PTFE Pressure Relief Valve 		BECO pressure relief valves
VPR01040104-PVA
Viton O-Ring Type PTFE Pressure Relief Valve 		BECO pressure relief valves
VPR01040316-TEA
EP (Ethylene Propylene) O-Ring Type PTFE Pressure Relief Valve 		BECO pressure relief valves
VPR01040316-TKA
Kalrez O-Ring Type PTFE Pressure Relief Valve
Orifice Size (in.) N/A
End Size (in.) N/A
End Connection N/A FNPT N/A FNPT N/A FNPT N/A Tube N/A Tube
O-Ring Type N/A EP (Ethylene Propylene) N/A Kalrez N/A Viton N/A EP (Ethylene Propylene) N/A Kalrez
Upper Housing and Base Plate Material N/A Aluminum
Port Size N/A 1/4 in
Orifice Size N/A 0.250 in N/A 0.250 in N/A 0.250 in N/A 0.188 in N/A 0.188 in