Jensen Inert Products - Multi-Layer Foil Gas Sampling Bags with Stainless Steel Swagelok® Type Fitting for 1/4" OD Tubing

Unit of Measure

Items	GSAS000-0606J 6 x 6 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing	GSAS000-0707J 7 x 7 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing	GSAS000-0610J 6 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing	GSAS000-0909J 9 x 9 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing	GSAS000-1010J 10 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Stainless Steel Swagelok^® Type Fitting for 1/4" OD Tubing
Film Material	N/A MULTI-LAYER FOIL
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.0046 in
Note	N/A Valve is Stainless Steel. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I Dupont
Bags Per Package	N/A 5
Valve/Fitting Features	N/A Stainless steel construction. Option of cap for tubing or septum. Replaceable fluoropolymer faced septum with large area.
Film Key Features	N/A Our Multi-Layer Foil bags are the best choice for collecting and storing H2S. Ideal for sampling and storing for low molecular weight compounds such as Methane, CO, CO2, Hydrogen, and inert gases which are not stable in Tedlar®, ALTEF, or FEP. Water and vapor proof, these opaque, flexible bags protect light sensitive compounds. They provide up to 5 day sample stability for many VOCs, with minimal adsorption.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A Ideal for collecting low molecular weight compounds such as: CH₄, H₂S, CO, and CO₂ Foil layers provide very low permeability and complete moisture barrier Maximum operating temperature: 190 ºF Opaqueness protects samples from ultraviolet light
Film Advantages	N/A The only bag material that adequately holds H₂S for long periods (>5 to 7 days) Ideal for collecting low molecular weight compounds Sample stability for up to 5 days for most compounds Very low permeability to O₂, CO₂ Good VOC stability Less expensive than Tedlar^® and ALTEF
Film Limitations	N/A Not recommended for collecting low ppm to high ppb VOC's due to background levels from bag materials Recommend analyzing within 48 hours after collection for methane, hydrogen sulfide, carbon monoxide and carbon dioxide
Valve/Fitting Benefits	N/A Durable and able to withstand use in austere sampling conditions. Allows attachment of tubing or syringe sample extraction by switching caps. Allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum.
Use with Tubing Size (OD)	N/A 1/4 in
Minimum Order Quantity	N/A 5