Jensen Inert Products - Multi-Layer Foil Gas Sampling Bags with Locking Combo® Valve with Septum

POLYPROPYLENE LOCKING COMBO^® VALVE WITH SEPTUM

On/Off valve function with septum in a single unit is economical.
Lightweight, making it easier to carry in the field and reduces shipping costs.
Made of inert polypropylene to ensure purity of sample and non-contamination.
Push/Pull (On/Off) valve stem for quick, easy opening and closing of valve (< 1 second).
Faster than "twist action" valves.
Quick locking function, in closed position. Locked position is easy to verify visually, and prevents accidental sample loss during shipment
Virtually impossible to open or close valve too far
Valve Stem is 3/16" diameter
Fluoropolymer faced septum, with Ultra-low bleed silicone, prevents contamination and is located in base flange of valve with bag film below, so septum does not come into contact with sample inside bag.
Septum allows repeated punctures with syringes without leakage
Designed, Patented and Manufactured by Jensen Inert Products specifically for gas sampling applications.

Locking Combo<sup>®</sup> Valve with Septum

Multi-Layer Foil Bag with Locking Combo Valve<sup>®</sup> with Septum

Unit of Measure

Items	GSAP000-0606LJC 6 x 6 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Locking Combo Valve^® with Septum	GSAP001-0707LJC 7 x 7 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Locking Combo Valve^® with Septum	GSAP000-0610LJC 6 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Locking Combo Valve^® with Septum	GSAP002-0909LJC 9 x 9 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Locking Combo Valve^® with Septum	GSAP003-1010LJC 10 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag with Locking Combo Valve^® with Septum
Film Material	N/A MULTI-LAYER FOIL
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.0046 in
Note	N/A Valve is inert, industry standard polypropylene. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I. Dupont
Bags Per Package	N/A 10
Valve Stem Diameter	N/A 3/16 in
Valve/Fitting Features	N/A On/Off valve function with septum in a single unit. Lightweight. Made of Inert polypropylene. Push/Pull (On/Off) valve stem. Quick Locking function, in closed position, with visual confirmation. No tools required. Fluoropolymer faced septum, with Ultra-low bleed silicone. Designed, patented and manufactured by Jensen Inert Products.
Film Key Features	N/A Our Multi-Layer Foil bags are the best choice for collecting and storing H2S. Ideal for sampling and storing for low molecular weight compounds such as Methane, CO, CO2, Hydrogen, and inert gases which are not stable in Tedlar®, ALTEF, or FEP. Water and vapor proof, these opaque, flexible bags protect light sensitive compounds. They provide up to 5 day sample stability for many VOCs, with minimal adsorption.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A Ideal for collecting low molecular weight compounds such as: CH₄, H₂S, CO, and CO₂ Foil layers provide very low permeability and complete moisture barrier Maximum operating temperature: 190 ºF Opaqueness protects samples from ultraviolet light
Film Advantages	N/A The only bag material that adequately holds H₂S for long periods (>5 to 7 days) Ideal for collecting low molecular weight compounds Sample stability for up to 5 days for most compounds Very low permeability to O₂, CO₂ Good VOC stability Less expensive than Tedlar^® and ALTEF
Film Limitations	N/A Not recommended for collecting low ppm to high ppb VOC's due to background levels from bag materials Recommend analyzing within 48 hours after collection for methane, hydrogen sulfide, carbon monoxide and carbon dioxide
Valve/Fitting Benefits	N/A Economical: Cost savings in manufacturing is passed on to customers. Reduces shipping costs. Easier to carry multiple bags into the field. Ensures purity of sample and non-contamination. Quick, easy opening and closing of valve (< 1 second). Faster than "twist-action" valves. Locked position is easy to verify visually, and prevents accidental sample loss during shipment. Virtually impossible to open or close valve to far. Located in base flange of valve with bag film below, so septum does not come into contact with sample inside bag. Septum allows repeated punctures with syringes without leakage. Ultra-low bleed silicone prevents contamination. Designed specifically for gas sampling applications.
Use with Tubing Size (ID)	N/A 3/16 in
Minimum Order Quantity	N/A 10