Jensen Inert Products - ALTEF Gas Sampling Bags with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum

STAINLESS STEEL PUSH/PULL VALVE AND SEPARATE STAINLESS STEEL SEPTUM FITTING WITH REPLACEABLE SEPTUM

This combination of fitting and valve allows for use of Push/Pull valve for tubing and a separate fitting for septum use.
Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions.
Replaceable fluoropolymer faced septum, allows repeated punctures with common lab syringes.
Allows reuse of valve by only replacing septum
Push/Pull (On/Off) valve stem for quick, easy opening and closing of valve
Aluminum collar locked on SS valve body and nut+
3/16” diameter Stainless Steel stem

Request Information

Unit of Measure

Items	GSSSSFP-0606 6 x 6 Inch (in) Size ALTEF Gas Sampling Bag with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum	GSSSSFP-0707 7 x 7 Inch (in) Size ALTEF Gas Sampling Bag with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum	GSSSSFP-0610 6 x 10 Inch (in) Size ALTEF Gas Sampling Bag with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum	GSSSSFP-0909 9 x 9 Inch (in) Size ALTEF Gas Sampling Bag with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum	GSSSSFP-1010 10 x 10 Inch (in) Size ALTEF Gas Sampling Bag with Stainless Steel Push/Pull Valve and Separate Stainless Steel Septum Fitting with Replaceable Septum
Film Material	N/A ALTEF
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.003 in
Note	N/A Valve and Fitting is Stainless Steel. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I. Dupont
Bags Per Package	N/A 10
Additional Information	N/A Catalog No. SEP-9010-TCLP-10, Replacement Septa for Stainless Steel Fitting, 10 per pack
Valve/Fitting Features	N/A Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions. Stainless Steel valve body and nut 3/16" OD Stainless Steel stem Thumbscrew to lock valve in open or closed position Replaceable fluoropolymer faced septum, allows repeated punctures with common lab syringes. Septum fitting allows reuse of valve by only replacing septum
Film Key Features	N/A ALTEF is a proprietary fluoropolymer film developed specially for the air sampling market. ALTEF meets or exceeds many of the desired characteristics of Tedlar®. Unlike Tedlar®, ALTEF does not exhibit background levels of DMAC and phenol. ALTEFexhibits similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs. Low VOC and sulfur background levels. Contains no additives, fillers or pigments. Minimal adsorption. Superior storage for organics. Abrasion Resistant.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A Developed specifically for gas sampling applications Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and alcohols Maximum operating temp: 260 ºF ALTEF bags are made of 0.003" thick film. Tensile Strength 6100 psi
Film Advantages	N/A Suitable for sampling most VOCs and many sulfur compounds Low VOC background Longer sample storage times than most other bag materials Does not exhibit background levels of DMAC or phenol, as Tedlar^® does Lower permeability than Tedlar^® to CO₂, N₂, CH₄ Superior resistance to solvents
Film Limitations	N/A More permeable to most compounds than Tedlar^® (0.003" thick versus 0.002" for Tedlar^® Bags) Not suitable for sampling ketones and esters in high concentrations (>30 %) Less resistance to UV light than Tedlar^® Many sulfur compounds should be analyzed within 24 hours. More expensive than Tedlar^®
Valve/Fitting Benefits	N/A Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions. Thumbscrew to lock valve in open or closed position Replaceable fluoropolymer faced septum, allows repeated punctures with common lab syringes.
Use with Tubing Size (ID)	N/A 3/16 in
Minimum Order Quantity	N/A 10

Catalog

At Jensen Inert Products, Customer Service and Satisfaction are our main objectives; therefore if we can be of further assistance, please feel free to contact us.