STAINLESS STEEL TCLP FITTING WITH REPLACEABLE SEPTUM
  • Stainless Steel body construction with aluminum cap provides durability and withstands use in austere sampling conditions.
  • Sample contacts only stainless steel
  • Lower cost compared to 1/4" Swagelok® type fittings and Nickel Plated Halkey® Roberts fitting
  • Designed for use with Zero Headspace Extractors, validated fitting style for EPA TCLP (Toxicity Characteristic Leaching Procedure) method
Request Information
Unit of Measure
Items
EPA TCLP Method with Single Stainless Steel Septum Fitting

6 x 6 Inch (in) Size ALTEF Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

7 x 7 Inch (in) Size ALTEF Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

6 x 10 Inch (in) Size ALTEF Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

9 x 9 Inch (in) Size ALTEF Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

10 x 10 Inch (in) Size ALTEF Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
Film Material N/A ALTEF
Capacity N/A 0.6 L N/A 1.0 L N/A 1.2 L N/A 2.0 L N/A 3.0 L
Size N/A 6 x 6 in N/A 7 x 7 in N/A 6 x 10 in N/A 9 x 9 in N/A 10 x 10 in
Film Thickness N/A 0.003 in
Note N/A Fitting is Stainless Steel.
Locking Combo® is a registered trademark of Jensen Inert Products, Inc.
Swagelok® is a register trademark of Swagelok, Inc.
Jaco® is a registered trademark of Jaco Manufacturing, Inc.
HR® is a registered trademark of Halkey Roberts, Inc.
Tedlar® is a registered trademark of E.I. Dupont
Bags Per Package N/A 10
Additional Information N/A Catalog No. SEP9010-TCLP-10, SEPTA, 10/90, for TCLP Fitting/10EA
Valve/Fitting Features N/A
  • Stainless steel body construction with aluminum cap.
  • Designed and manufactured by Jensen Inert Products.
  • Designed for use with Zero Headspace Extractors.
  • Replaceable fluoropolymer faced septum.
Film Key Features N/A
  • ALTEF is a proprietary fluoropolymer film developed specially for the air sampling market.
  • ALTEF meets or exceeds many of the desired characteristics of Tedlar®.
  • Unlike Tedlar®, ALTEF does not exhibit background levels of DMAC and phenol.
  • ALTEFexhibits similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs.
  • Low VOC and sulfur background levels.
  • Contains no additives, fillers or pigments.
  • Minimal adsorption.
  • Superior storage for organics.
  • Abrasion Resistant.
Suggestion N/A
  • Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
  • During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
  • Bags should not be filled to more than 80% of their maximum volume.
  • Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
  • Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
  • Bags should not be used to collect reactive or unstable compounds.
  • When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties N/A
  • Developed specifically for gas sampling applications
  • Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and alcohols
  • Maximum operating temp: 260 ºF
  • ALTEF bags are made of 0.003" thick film.
  • Tensile Strength 6100 psi
Film Advantages N/A
  • Suitable for sampling most VOCs and many sulfur compounds
  • Low VOC background
  • Longer sample storage times than most other bag materials
  • Does not exhibit background levels of DMAC or phenol, as Tedlar® does
  • Lower permeability than Tedlar® to CO2, N2, CH4
  • Superior resistance to solvents
Film Limitations N/A
  • More permeable to most compounds than Tedlar® (0.003" thick versus 0.002" for Tedlar® Bags)
  • Not suitable for sampling ketones and esters in high concentrations (>30 %)
  • Less resistance to UV light than Tedlar®
  • Many sulfur compounds should be analyzed within 24 hours.
  • More expensive than Tedlar®
Valve/Fitting Benefits N/A
  • Durable, withstands use in austere sampling conditions. Sample contacts only stainless steel.
  • Lower cost compared to 1/4" Swagelok® type fittings and nickel plated Halkey® Roberts fitting.
  • Validated fitting style for EPA TCLP (Toxicity Characteristic Leaching Procedure) method. Not an "off the shelf' item.
  • Allows reuse of valve and bag by only replacing septum
Minimum Order Quantity N/A 10