STAINLESS STEEL TCLP FITTING WITH REPLACEABLE SEPTUM
  • Stainless Steel body construction with aluminum cap provides durability and withstands use in austere sampling conditions.
  • Sample contacts only stainless steel
  • Lower cost compared to 1/4" Swagelok® type fittings and Nickel Plated Halkey® Roberts fitting
  • Designed for use with Zero Headspace Extractors, validated fitting style for EPA TCLP (Toxicity Characteristic Leaching Procedure) method
Request Information
Unit of Measure
Items
EPA TCLP Method with Single Stainless Steel Septum Fitting

6 x 6 Inch (in) Size Multi-Layer Foil Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

7 x 7 Inch (in) Size Multi-Layer Foil Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

6 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

9 x 9 Inch (in) Size Multi-Layer Foil Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
EPA TCLP Method with Single Stainless Steel Septum Fitting

10 x 10 Inch (in) Size Multi-Layer Foil Gas Sampling Bag for EPA TCLP Method with Single Stainless Steel Septum Fitting
Film Material N/A MULTI-LAYER FOIL
Capacity N/A 0.6 L N/A 1.0 L N/A 1.2 L N/A 2.0 L N/A 3.0 L
Size N/A 6 x 6 in N/A 7 x 7 in N/A 6 x 10 in N/A 9 x 9 in N/A 10 x 10 in
Film Thickness N/A 0.0046 in
Note N/A Fitting is Stainless Steel.
Locking Combo® is a registered trademark of Jensen Inert Products, Inc.
Swagelok® is a register trademark of Swagelok, Inc.
Jaco® is a registered trademark of Jaco Manufacturing, Inc.
HR® is a registered trademark of Halkey Roberts, Inc.
Tedlar® is a registered trademark of E.I. Dupont
Bags Per Package N/A 10
Additional Information N/A Catalog No. SEP9010-TCLP-10, SEPTA, 10/90, for TCLP Fitting/10EA
Valve/Fitting Features N/A
  • Stainless steel body construction with aluminum cap.
  • Designed and manufactured by Jensen Inert Products.
  • Designed for use with Zero Headspace Extractors.
  • Replaceable fluoropolymer faced septum.
Film Key Features N/A
  • Our Multi-Layer Foil bags are the best choice for collecting and storing H2S.
  • Ideal for sampling and storing for low molecular weight compounds such as Methane, CO, CO2, Hydrogen, and inert gases which are not stable in Tedlar®, ALTEF, or FEP.
  • Water and vapor proof, these opaque, flexible bags protect light sensitive compounds.
  • They provide up to 5 day sample stability for many VOCs, with minimal adsorption.
Suggestion N/A
  • Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
  • During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
  • Bags should not be filled to more than 80% of their maximum volume.
  • Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
  • Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
  • Bags should not be used to collect reactive or unstable compounds.
  • When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties N/A
  • Ideal for collecting low molecular weight compounds such as: CH4, H2S, CO, and CO2
  • Foil layers provide very low permeability and complete moisture barrier
  • Maximum operating temperature: 190 ºF
  • Opaqueness protects samples from ultraviolet light
Film Advantages N/A
  • The only bag material that adequately holds H2S for long periods (>5 to 7 days)
  • Ideal for collecting low molecular weight compounds
  • Sample stability for up to 5 days for most compounds
  • Very low permeability to O2, CO2
  • Good VOC stability
  • Less expensive than Tedlar® and ALTEF
Film Limitations N/A
  • Not recommended for collecting low ppm to high ppb VOC's due to background levels from bag materials
  • Recommend analyzing within 48 hours after collection for methane, hydrogen sulfide, carbon monoxide and carbon dioxide
Valve/Fitting Benefits N/A
  • Durable, withstands use in austere sampling conditions. Sample contacts only stainless steel.
  • Lower cost compared to 1/4" Swagelok® type fittings and nickel plated Halkey® Roberts fitting.
  • Validated fitting style for EPA TCLP (Toxicity Characteristic Leaching Procedure) method. Not an "off the shelf' item.
  • Allows reuse of valve and bag by only replacing septum
Minimum Order Quantity N/A 10