Jensen Inert Products - FEP Gas Sample Bags with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco® Fitting with Fluoropolymer Faced Septum

NICKEL PLATED HR^® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM AND SEPARATE PLASTIC JACO^® FITTING WITH FLUOROPOLYMER FACED SEPTUM

You get the features of both the HR^® Valve and the Jaco^® Fitting on one bag

HR^® Features:

Nickel Plated to resist damage from most aggressive chemicals
1/4" Barbed Stem for attaching tubing, helps keep tubing in place
Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve

Jaco^® Features:

Polypropylene molded construction is inexpensive compared to metal fittings
Replaceable fluoropolymer faced septum with large area, allows repeated punctures with common lab syringes.
Allows reuse of valve by only replacing septum.
Option of cap with septum or cap with tubing, allows syringe sample extraction or attachment of tubing by changing caps.
Compression ferrule secures tubing onto fitting, which provides a superior grip compared to metal fittings.
Standard Jaco^® can be used with 1/4" tubing. Jaco^® for 1/2" and 3/8" tubing also available.

Request Information

Unit of Measure

Items	GSF101S-0606 6 x 6 Inch (in) FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum	GSF101S-0707 7 x 7 Inch (in) FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum	GSF101S-0610 6 x 10 Inch (in) FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum	GSF101S-0909 9 x 9 Inch (in) FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum	GSF101S-1010 10 x 10 Inch (in) FEP Gas Sample Bags with Nickel Plated HR^® ON/OFF Valve with 1/4'' Diameter Barbed Stem & Separate Plastic 1/4" Jaco^® Fitting with Fluoropolymer Faced Septum
Film Material	N/A FEP
Capacity	N/A 0.6 L	N/A 1.0 L	N/A 1.2 L	N/A 2.0 L	N/A 3.0 L
Size	N/A 6 x 6 in	N/A 7 x 7 in	N/A 6 x 10 in	N/A 9 x 9 in	N/A 10 x 10 in
Film Thickness	N/A 0.005 in
Note	N/A HR^® Valve is Nickel Plated and Jaco Fitting is inert, industry standard polypropylene. Locking Combo^® is a registered trademark of Jensen Inert Products, Inc. Swagelok^® is a register trademark of Swagelok, Inc. Jaco^® is a registered trademark of Jaco Manufacturing, Inc. HR^® is a registered trademark of Halkey Roberts, Inc. Tedlar^® is a registered trademark of E.I. Dupont
Bags Per Package	N/A 10
Additional Information	N/A Catalog No. CAP-14-JT, Cap, Polypropylene, Jaco^® Set Up for 1/4" Tubing Catalog No. SEP5007-JSF-10, Septa, 10/90, 10 mm for Jaco Fitting/10 EA.
Valve Stem Diameter	N/A 1/4 in Barbed
Valve/Fitting Features	N/A Compression ferrule secures tubing onto fitting. Polypropylene molded construction. Option of cap for tubing, or cap with septum. Replaceable fluoropolymer faced septum with large area. Nickel Plated Barbed stem for attaching tubing. Leak resistant seal in closed position.
Film Key Features	N/A FEP is one of the most chemically inert materials for making gas sampling bags. It works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in most stack sampling conditions. 5 mil FEP film is completely resistant to the most severe corrosives. Much more permeable than Multi-Layer or Tedlar®. FEP bags can be specified for applications involving corrosive gases.
Suggestion	N/A Before use, thoroughly flush bags with ultra-pure nitrogen or zero air During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss. Bags should not be filled to more than 80% of their maximum volume. Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface. Bags should not be used to collect reactive or unstable compounds. When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties	N/A One of the most chemically inert materials available for making gas sampling bags Maximum operating temperature: 400 ºF Virtually transparent
Film Advantages	N/A Works well in extreme temperatures ranging from -400 to 400 ºF; allowing it to be used in all stack sampling conditions Heavier gauge (0.005) film is resistant to most severe corrosives as well as tolerates applications involving rough handling or difficult service conditions Less expensive than PFA
Film Limitations	N/A Poor long term storage stability for most VOC's and sulfur compounds Much more permeable than Tedlar^®, ALTEF, and Multi-Layer Foil bags More expensive than Tedlar^®, ALTEF, Multi-Layer Foil, and TFM bags Lower tensile strength than Tedlar^®
Valve/Fitting Benefits	N/A Superior grip compared to metal fittings. Inexpensive compared to metal fittings. Allows attachment of tubing or syringe sample extraction by changing caps. Allows repeated punctures with common lab syringes. Allows reuse of valve by only replacing septum. Resists damage from most aggressive chemicals. Helps hold tubing in place. Prevents sample loss in closed position. However, when stem is not closed, sample air passes into ambient air outside valve.
Use with Tubing Size (OD)	N/A 1/4 in
Minimum Order Quantity	N/A 10

Catalog

At Jensen Inert Products, Customer Service and Satisfaction are our main objectives; therefore if we can be of further assistance, please feel free to contact us.