PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 550 ºF (288 ºC). Each package contains100 balls. Choose from a variety of sizes.

• For column packing and mixing beds
• Resistant to most chemicals
• Non-contaminating

Use PTFE Beading as a cord or thread to sew mesh bags. Available in diameters from 0.028" to 0.094".

• Allows direct pouring in a safe and consistent manner
• Manufactured in pure, FDA approved, PTFE
• Totally chemically resistant and inert
• Safe & Reliable

Sized to fit GL45, 38, 32 & 30 screw neck bottles
Available with Blue, Red or Green caps, specify when ordering.

PTFE Laboratory Matting resists stains and adhesion of a wide range of materials and it is easy to clean. It can be used on benches, sinks, drain boards and shelves to reduce breakage of glassware. The laboratory matting has a diamond-shaped PTFE mesh and is 1/16" (1.6 mm) thick with 1/4" (6.35 cm) openings. Useful as a mesh bag for dipping parts in corrosive chemicals and solvents, it is also excellent as liner for cryogenic units. To create a bag, use PTFE Beading.

• Corrosion resistant
• Non-wettable
• Chemically inert

PTFE Ladles are totally chemically resistant and inert
Shafts have a steel core, fully encapsulated in PTFE, for rigidity
Suitable for sampling the most aggressive media

Jensen Inert has a full line of Virgin PTFE Rods, ranging from 9/64" to 4" in diameter. Priced per foot and standard lengths are 6'.

• Totally chemically inert
• Overall length 140 mm
• Use up to 280 ºC

Resistant to most chemicals, PFA Sieves are ideal for ultra-pure applications. The low surface energy of PFA facilitates quick drainage and clean up. Mesh size 1.0 mm. Use with containers that have openings of 80 mm or greater and a capacity ranging from 300 mL to 1000 mL.

• Non-contaminating and resistant to most chemicals
• Ideal for coarse sorting or draining of aggressive media
• Handle hooks over edge of vessel for draining

• Wetted parts are PTFE only
• Medium vacuum pressure performance
• Plug cannot be accidently removed
• All PTFE stopcock - inert, grease-free and unbreakable
• Supplied with borosilicate side arms

• Inert to virtually all chemical reagents
• Suitable for repeatedly sterilizing
• Suitable for ovens and high temperature thermostats
• Use from cryogenic to 250 ºC (480 ºF)
• Standard "foot print" : 180 mm x 60 mm

• Enables standard probes and thermometers to be assembled in standard taper laboratory glassware.
• The body is pure PTFE - fully adjustable with Viton^®seal.
• Contact materials are glass and PTFE only.

• Inert to virtually all chemical reagents
• Completely non-contaminating
• Use up to 280 ºC (540 ºF)
• Super smooth non-stick surface
• Available with sharp end or square end